|ur productivity depends very much on the efficiency of your Material Handling System. On the movements of goods – to be more specific. To insure a smooth flow of goods in your production unit, we’ll simply put them on wheels for you.|
CHASSIS – A robust fabrication made out of rolled channels and plates.
DRIVE MOTOR – A variable speed totally enclosed DC series motor is mounted above the drive wheel.
TRANSMISSION – The motor drive to the wheel is transmitted through a double reduction gear by a chain reduction. The drive motor and transmission system swivel on heavy-duty self-aligning bearings.
ELECTRICAL SYSTEM- For smooth acceleration and deceleration a MOSFET chop-per control is provided for speed control. All the controls are located below the steering handle. Controls for forward/ reverse motion, horn, light emergency cutoff and key switch are mounted on dash board.
BRAKE The brake comprises two internal expanding shoes mounted on rear axle with parking brake facility.
ECONOMICAL The motor speed control is USE OF done through chopper control.
BATTERY POWER There is no energy loss unlike in resistence control method, where energy is dissipated in resistors. Saved energy is utilised for useful work.
EXTRA OPTIONALS Hydraulic lift, low voltage battery discharge alarm, chequered platform, lengthy platform etc.
|CAPACITY (Kgs)||1 Ton||2 Tonnes||3 Tonnes|
|PLATFORM HEIGHT (mm)||325||325||325||500|
|PLATFORM LENGTH B1 (mm)||1500||1500||1500||750/1500|
|PLATFORM WIDTH (mm)||1000||1000||1000|
|TYRES (Solid Tyre)|
|FRONT||460 X 125||460 X 125||460 X 125||460 X 125|
|REAR||305 X 125||305 X 125||305 X 125||460 X 125|
|TURNING RADIUS (mm)||2400||2400||2400|
|GROUND CLEARANCE (mm)||100||100||100|
|OVERALL LENGTH L1(mm)||3000||3000 •||3000||2200|
|FRONT OVER HANG L2 (mm)||420||420||420|
|WHEEL BASE L3 (mm)||1990||, 1990||1990||1400|
|WHEEL TRACK (mm)||840||840||840|
|TRAVEL SPEED (Kms/hr)|
|LADEN||8 -10||7-9||4 – 6|
|UNLADEN||10 – 12||10 – 12||6 – 8|
|CURB WEGIHT (Kg)||700||775||850|
|CHARGING TIME (hrs)||5 – 6||5 – 6||5 – 6|
|PRIME MOVER (Series Motor)||30V, 2.3HP DC||30 V, 3HP DC||30V, 4HP DC|
|BATTERIES (Lead Acid Type)||30V, 150AH||30V, 150AH||30V, 150AH|
|CONTROLLERj||2200 – 250||2200 – 300||2200 – 350|